GANESH MACHINE TOOLS
Mfg.: GMT & PARAG Brand Lathe Machine in All Series & Capstan Lathe Machine

Medium Duty Lathe

Specification
SPECIFICATION 4'1/2" (1370 mm) 6' (1825 mm)
INCH MM INCH MM
Bed Width 11" 279 11" 279
Height of Center Over Flat Bed Ways 9" 226 9" 226
Maximum Swing over bed 17" 432 17" 432
Maximum Swing over Cross Slide 11" 280 11" 280
Maximum Swing in Gap 26" 660 26" 660
Admit Between Centre 18" 457 36" 915
Spindle Nose 6 TPI 6 TPI
Number of Spindle Speed 6 Range 6 Range
Diameter of Hole Through Spindle 2 1/16" 52 2 1/16" 52
Inch Range Threads 4 to 60 TPI 4 to 60 TPI
Metric Range Threads 0.5 to 7.5 mm 0.5 to 7.5 mm
Lead Srew Dia. & Pitch 1.1/4" 31.75 1.1/4" 31.75
Feed Shaft Dia. 7/8" 22.22 7/8" 22.22
Tail Stock Spindle Dia. 1.3/4 44.45 1.3/4 44.45
Tail Stock Spindle Taper Bore MT-4 MT-4
Tail Stock Spindle Travel 5.1/2 140 5.1/2 140
Power Required 2 H.P. 1440 RPM 2 H.P. 1440 RPM
Approx Weight 600 Kgs. 800 Kgs.
Special Features

Bed : Bed & all Casting Parts are manufactured in our Foundry. The Bed is made from A graded Casting 2V & 2 Flat type. Hardened & Ground Bed ways.

Head Stock : Head Stock Body is of latest specially design induction hardened & Ground spindle of special alloy steel. All centrifugal running parts are well balanced.

Apron & Norton : A four walled closed type with oil bath apron & norton having a best quality gears. Sliding & Surfacing feeds can be engaged by tightening a star knobs & engaging lever at appropriate position.

Tail Stock : Hexagonal shapped body. Tail Stock spindle having external & internal grinding with MT-4 Internal Tapper is provided. It can be off set for tapper turning.