Hydraulic Press (Power-Operated)

Hydraulic Press
(Power Operated)
Frame Construction
Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.
Cylinder
The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System
The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
TONS | BETWEEN COLUMN LENGTH x WIDTH (mm) | BETWEEN RAM TO BED MIN x MAX (mm) | TRAVEL OF RAM (mm) | RAM SIZE (mm) | MACHINE PLATE SIZE (mm) | MOTOR (H.P) |
---|---|---|---|---|---|---|
5 | 500 x 200 | 75 x 600 | 150 | 30 | 8 | 1 |
10 | 600 x 200 | 75 x 600 | 200 | 45 | 8 | 1 |
15 | 650 x 200 | 75 x 600 | 200 | 50 | 12 | 1.5 |
25 | 850 x 300 | 180 x 910 | 200 | 60 | 12 | 1.5 |
40 | 950 x 350 | 180 x 910 | 250 | 70 | 16 | 2 |
50 | 1000 x 400 | 180 x 950 | 250 | 80 | 16 | 3 |
60 | 1050 x 450 | 180 x 975 | 250 | 85 | 20 | 3 |
75 | 1180 x 500 | 180 x 975 | 250 | 90 | 20 | 3 |
100 | 1200 x 600 | 180 x 975 | 225 | 100 | 25 | 5 |
150 | 1300 x 625 | 180 x 975 | 240 | 125 | 30 | 7.5 |
200 | 1325 x 660 | 180 x 975 | 240 | 140 | 40 | 10 |
250 | 1350 x 650 | 180 x 975 | 250 | 160 | 50 | 10 |
300 | 1450 x 700 | 180 x 1000 | 260 | 180 | 60 | 15 |
500 | 1500 x 1000 | 200 x 1100 | 300 | 200 | 75 | .20 |
- Die and Punch Tooling
- Anti-vibration mount
- Base Plate
- Hydraulic oil
- Auto Service Station
- Repairing Workshop
- Pressing of Ball Bearings
- Removal of Old Bushes And Mounting New Bushes
- Straightening
- Pressing
- Baling
- Drawing
- Embossing
- Broaching
- Bending
- Breaking
- Joining of Steel
- In Plastic, Rubber & Plywood Industries
- In Electric Motors, Submersible Pump etc. Industries
- Gold/Silver Coin Monogram Embossing
- Mosaic Tiles
- Bakelite Parts
- Textile Part Industries