Light duty all geared lathe machines cost less than most first-time buyers expect, yet the same class of machine can carry very different price tags depending on who sells it and where. Listings from Rajkot manufacturers in 2026 cluster between about ₹85,000 and ₹1.4 lakh, while dealers in distant states list comparable machines much higher. This guide explains what the money buys, what pushes a quote up or down, and how to compare offers without overpaying.
Light duty all geared lathe machines in India generally cost between ₹85,000 and ₹1.4 lakh when bought from Rajkot manufacturers in 2026. Bed length, spindle bore, motor and gearbox quality drive the difference, so compare itemised quotes on identical specifications instead of headline figures.
What Is a Light Duty All Geared Lathe Machine, and Who Buys One?
A light duty all geared lathe machine drives its spindle through a gearbox instead of belts, and it is sized for small, precise turning jobs. A typical listing describes a 3.6 ft bed, 250 mm maximum swing, 38 mm spindle bore and a weight near 185 kg, running on 220 to 240 V supply. Cutting speed reaches about 35 m/min, which suits mild steel, brass and aluminium parts.
The 250 mm swing means a centre height of about 125 mm, so the machine turns work up to roughly 250 mm in diameter. Anything wider belongs on a medium duty lathe.
Motor and speed ranges vary by model. A 1.5 HP unit with spindle speeds from 45 to 1,000 rpm is common in the light class, while 6 ft models step up to 3.5 kW with 220 to 800 rpm.
Check the phase requirement before ordering. A 1 HP class machine can run on single-phase supply, while 3.5 kW models normally call for three-phase.
Buyers are mostly tool rooms, repair shops, technical institutes and prototype makers. The appeal for them is speed changes by lever and steady torque, without the belt slip that stepped-pulley machines suffer.
How Much Do Light Duty All Geared Lathe Machines Cost in India in 2026?
Rajkot manufacturer listings put light duty geared lathes between roughly ₹85,000 and ₹1.4 lakh. One maker lists a light duty geared model at ₹1,28,000 and a semi-automatic all-gear light duty model at ₹1,15,000, while another lists a 6 ft light duty machine at ₹1,39,000. A 3 ft mini bench lathe from the same city starts near ₹77,500.
Prices climb steeply as duty class rises. The table below reads the ladder from 2026 Rajkot listings, and it doubles as a quick view of heavy duty lathe machine price against the light class.
| Class | Bed length | Listed price (from) |
| Mini bench | 3 ft | ₹77,500 |
| Light duty | 6 ft | ₹1,39,000 |
| Medium duty all gear | 6 and 8 ft | ₹2,59,000 |
| Heavy duty all gear | 7 to 14 ft | ₹3,25,000 |
| Heavy duty all gear | 9 to 18 ft | ₹4,75,000 |
Treat these as starting prices, not quotations. A listing usually shows the base machine, and the final invoice adds accessories, freight and GST.
Quotes also expire. Marketplace pages refresh often, with some showing updates as recent as July 2026, so ask for a written validity date and lock the price before the supplier’s next revision.
What Decides the Price of a Light Duty Lathe?
Bed length is the first price driver, because every extra foot adds cast iron, machining time and grinding time. A 6 ft bed costs noticeably more than a 3.6 ft bed even when the headstock is identical.
Spindle bore, motor rating and gearbox quality come next. A wider bore lets bar stock pass through the headstock, a 3.5 kW motor costs more than a 1.5 HP one, and hardened ground gears with branded bearings cost more to build than soft gears with unbranded ones. That last difference rarely shows in a brochure and always shows after two years of daily use.
Warranty terms change the real cost too. A twelve-month warranty on the gearbox and spindle is a sensible baseline, and a supplier who also stocks replacement gears and bearings saves weeks of downtime. In a one-lathe shop, that downtime costs more than the gap between most quotes.
Accessories quietly change the total. Rajkot suppliers list a quick-change tool post near ₹6,500, a drill chuck near ₹1,000 and a revolving centre near ₹1,900, so a buyer adding all three pays about ₹9,400 extra. Ask which of these come standard before comparing two quotes.
A quick budget example shows the effect. A 6 ft light duty machine at ₹1,39,000 plus those three accessories reaches ₹1,48,400 before freight and GST, which already overlaps the price of a better-equipped model from another maker.
Should You Choose an All Geared or Cone Pulley Light Duty Lathe?
Cone pulley lathes move the belt across stepped pulleys, which makes them cheaper to build and simple to repair. A Rajkot cone pulley listing shows eight spindle speeds, enough for general work but slower to change than a lever.
All geared machines change speed with a lever, keep torque steady across the range and suit repeat jobs where the operator switches speeds often. Cone pulley fits occasional work and tight budgets, while all geared fits daily production where saved minutes add up.
A manufacturer of light duty cone pulley lathe machines in Rajkot will normally quote both types. Ask for both on the same bed length and motor, so the price gap between them is visible and fair.
Spindle speed gaps matter in daily use. Turning a 40 mm mild steel bar with high-speed steel tooling at 25 m/min needs about 200 rpm, and a machine with 45 to 1,000 rpm in many steps lands close to that figure. A cone pulley with eight fixed steps may sit a little above or below it.
Why Buy Light Duty All Geared Lathe Machines Directly from a Rajkot Manufacturer?
Buying direct removes the dealer margin and puts you in contact with the people who cast, machine and assemble the lathe. Rajkot’s directory lists dozens of lathe makers, so a buyer shopping for a lathe machine in Rajkot can visit three works in a day and compare finish, noise and cutting trials side by side. An hour at the machine tells you more than a week of phone calls.
Distance changes prices noticeably. A light duty lathe listed by a Kerala dealer shows ₹2,78,000, against ₹1,15,000 to ₹1,39,000 for Rajkot manufacturer listings. The specifications may not match exactly, but the gap is large enough to justify asking why.
Spare parts and service matter as much as the sticker. A maker such as [Brand Name] earns trust by listing gears, bearings and lead-screw nuts with part numbers and delivery times. Ask [Brand Name] or any other shortlisted supplier for a cutting trial on your own material before you pay an advance.
A short trial reveals most weaknesses. Run the gearbox through every speed with no load and listen for knocking. Clamp a dial indicator on the spindle nose and look for runout beyond 0.02 mm. Then turn a bar between centres and measure both ends with a micrometer, because a taper beyond 0.02 mm over 100 mm points to a worn or poorly aligned bed.
Frequently Asked Questions
What is the price of a light duty all geared lathe machine in India?
Rajkot manufacturer listings in 2026 range from roughly ₹85,000 to ₹1.4 lakh for light duty geared models. Dealers in other states can list higher, and final cost depends on accessories, freight and GST.
How does heavy duty lathe machine price compare with light duty?
Heavy duty all gear lathes start around ₹3.25 lakh for 7 to 14 ft beds in Rajkot listings, and 9 to 18 ft models start near ₹4.75 lakh. That is roughly two to four times the cost of a light duty machine.
Can a light duty lathe cut steel?
Yes, within limits. Listings describe cutting capacity up to about 25 mm in a single setup, which suits mild steel in small diameters but not heavy roughing of large shafts.
What should a lathe machine quotation include?
A proper quotation lists bed length, centre height, spindle bore, motor rating, standard accessories, delivery time, warranty and whether GST and freight are included. Missing lines are where hidden costs usually sit.
Can light duty all geared lathes cut threads?
Most models include a lead screw and either a quick-change gearbox or change gears for metric and inch threads. Confirm which system your model uses, since change gears take longer to set up on repeat jobs.
Ask three Rajkot makers for an itemised quote on the same sheet: bed length, bore, motor, accessories, warranty and delivery. Light duty all geared lathe machines look alike on a price list, and the differences only appear when each line is written down and compared. The supplier who answers every line without hesitation is usually the one worth ordering from.
